MODEL: CRS-200 high pressure common rail test bench
The functions of the CR tester for the high pressure common rail pump is to provide the desired signal to drive the solenoid in the pump be tested.
This test bench can used to test Bosch CP1,CP2,CP3,Delphi ,Siemens,Denso HP2 and HP3.
It has the function to test the electromagnetic and piezoelectric injectors.
It can also test 6 common rail injectors in one time
1.modulated driving signal to ensure the safety of the solenoid of the CR pumps.
2.adjust duty cycle for the driving signal
3.short circuit protection for the output circuitry of the solenoid driving signal
4.measure and LCD display rail pressure
5.to test if the CR injectors are still function,to connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness。the tester is set to continuous injection mode.the CR injector is in normal condition,if it is capable to inject fuel under the driving signals by the tester.
6.checking the injectors return oil and injection oil